Preparing Your Bin
Before applying a Wheelie Bin Label to your wheelie bin, make sure to clean the surface of your bin thoroughly with some detergent to remove any residue.
Application Instructions
Quick & Easy Method
Simply peel the label off the backing sheet and slowly apply to your bin. Smooth over with your hand or a soft cloth and hey presto, it’s complete. How easy!
Advanced Method
This way takes a little longer, but will give you the best result.
- Get a Spray Bottle and fill it with 1/2 cap of detergent (washing-up liquid) and the rest with water. Shake it to mix it together. NEVER USE JUST WATER.
- Carefully peel the Wheelie Bin Label away from the backing sheet.
- Spray the entire sticky side with the detergent mix (this will make it wet and allow it to be moved about easily).
- Place the Wheelie Bin Label on to your bin. If it goes on wrong, just peel it off and reapply.
- Once it's on perfectly, let it sit out in the sun for a good few hours so that the water evaporates. During this time make sure not to touch the label as it may move.
Once it’s on perfectly, you might notice a few air bubbles. Read our tip below to gently rub over to remove any air bubbles and detergent mix from the Wheelie Bin Label. Leave it for a few hours to dry before touching.
Can I remove my Wheelie Bin Label?
Yes. Simply get your fingernail under the label and peel off.
Removing Air Bubbles:
If you’ve got a few air bubbles in your label, simply get a pin and pierce a little hole in it. Then cover your credit or bank card with a soft cloth and use the edge to gently rub over the bin label until all the bubbles are gone.
Caring For Your Labels:
These Wheelie Bin Labels are 100% waterproof, so they’ll stay looking perfect in all kinds of weather. If your bin label gets a little grubby, just get mix some detergent with water and wipe over the label until the dirt comes off.
EUR (Euro)
