Removable Wall Graphics
These wall graphics offer brilliant flexibility. They can be removed and re-applied at any stage to your smooth, clean wall.

Preparing the Surface
Bright Star Kids® Wall Graphics have been tested extensively on a variety of different surfaces and substrates. Under normal conditions, it is removable from painted surfaces, without leaving any mess behind.

For best results these wall graphics should only be applied to clean, smooth and grease-free surfaces, avoiding papered walls or surfaces as the Wall Graphics may tear the paper when removed.

Freshly painted walls should be allowed to dry in a wel-ventilated room for at least 2-3 weeks before applying any
Wall Graphics.

Application Instructions
Lay the Wall Graphics on the floor and
plan how you'd like to decorate the room.

Slowly and gently peel one of the Wall
Graphics off the backing paper.

Apply to the wall and gently rub over the surface with a soft cloth or with the back of your hand.

Repeat with the remaining Wall Graphics until you've finished decorating your room.

To Remove the Wall Graphics & keep for later, gently them peel off the wall (being careful not to stretch or tear) and stick them on to the backing paper that they came on.

Care Instructions

• If your Wall Graphics get a little grubby, don't worry. Just use a cloth or paper towel lightly moistened with water ONLY and gently rub off the marks. Do not soak, rub aggressively or use soap or abrasives.
• The Removable Wall Graphics can be damaged by intense moisture, causing them to peel away, so we recommend keeping them dry.

Important Notes

1. Do NOT place these Wall Graphics within reach of a young child's crib or bed to avoid the possibility of the Wall Graphics falling into the infant's possession without supervision.
2. Avoid placing the Wall Graphics near direct sources of heat.
3. Only apply to a smooth, clean and dry surface. The Wall Graphics may not adhere properly if applied to uneven, textured or damp surfaces.